2013年7月18日

Broadcad ADX1000 debug note


列出目前debug的資料,Debug message destination 表示要將訊息送到哪個終端機或syslog
ServerIronADX 1000# show debug
Debug message destination:  Console  
LACP: port debugging 65535 is turned on

列出目前登入的連線,建議使用兩個終端連線,一個下指令另一個顯示debug訊息
ServerIronADX 1000# show who
Console connections:
        established
        75 days 15 hours 8 minutes 55 seconds in idle
Telnet connections (inbound):
 1      established, client ip address xx.xx.xx.xx
        you are connecting to this session
        1 minutes 47 seconds in idle
 2      closed
 3      closed
 4      closed
 5      closed
Telnet connection (outbound):
 6      closed
SSH connections:
 1      closed
 2      closed
 3      closed
 4      closed
 5      closed

若要抓有關 1.2.3.4 的連線資訊
ServerIronADX 1000# debug ip tcp 1.2.3.4
ServerIronADX 1000# debug destination telnet 1 (1為telnet連線代號,由show who取得)

關閉debug功能
ServerIronADX 1000# undebug all

沒有留言:

張貼留言